This battery requires Blunux v4.2.6 (March 2025) or newer. If unsure, please verify the Blunux version before inserting the battery.
Overview
Introduction
The Standard Capacity Battery is a 90.7Wh removable battery that provides up to 2 hours of diving time. It can be charged while installed in the drone or with a portable charger outside.
Since the battery is less than 100 Wh, it is safe to bring it as a carry-on on airplanes. However, in order to be 100% sure when traveling, bring along a copy of the UN38.3 report for the battery, as some airport staff might ask for this, as it is a part of the IATA lithium guidance document.
Improved features in 2.0
Battery status LEDs
The LED pattern shows the battery's current state of charge. The LEDs use a combination of solid and blinking lights to provide as accurate state of charge as possible.
- LED1 blinking: 0% to 12% charge
- LED1 solid: 12% to 25% charge
- LED2 blinking: 25% to 37% charge
- LED2 solid: 37% to 50% charge
- LED3 blinking: 50% to 62% charge
- LED3 solid: 62% to 75% charge
- LED4 blinking: 75% to 87% charge
-
LED4 solid: 87% to 100% charge
Specifications
| Specs | Standard Capacity Battery 1.0 | Standard Capacity Battery 2.0 |
|---|---|---|
| Nominal voltage | 14.8 V | 14.4 V |
| Nominal capacity | 6500 mAh | 6300 mAh |
| Nominal energy | 96.2 Wh | 90.7 Wh |
| Max discharge | 40 A | 30 A |
| Max charge | 10 A | 6.5 A |
| Operating temperature | -5 to +35 °C | -5 to +35 °C |
| Charging temperature | 5 to 30 °C | 5 to 30 °C |
Read more:
Charging the Blueye Smart Battery
Comments
0 comments