Blueye Smart Battery
The Blueye Smart Battery is a 96.2Wh removable battery that provides up to 2 hours diving time. It can be charged while installed inside the drone or outside with a portable charger.
As the battery is less than 100Wh it is safe to bring it as a carry-on item on airplanes. However, in order to be 100% sure when traveling bring along a copy of the UN38.3 report for the battery as some airport staff might ask for this as it is a part of the IATA lithium guidance document
Read more:
Charging the Blueye Smart Battery
Charger
 |
Warning: The charger is NOT splash-proof. It needs to be kept away from water and dust. |
The charger can charge the drone battery either through the charging cable or by connecting the Smart Battery to the plug on the backside of the charger. Store the charger in the charger bag.
Using the charger
To charge the drone with the battery charger cable, set the charger selector switch to the drone symbol.
To charge the battery by connecting it directly to the charger, set the charger selector switch to the battery symbol.
| The battery is charging | The battery is fully charged |
Troubleshooting
If the battery charging LED is blinking instead of emitting a steady light the battery is in an error state, most likely caused by being either too cold or too warm. Make sure the battery is within its specified temperature range (5 to 30 °C) for charging and try again. If the problem persists please contact our support team.
Read more:
Comments
0 comments