How to pack the tether and connect it to the surface unit for the first time?

First time packing instructions:

This is for customers who use tether bags and not reel. 

1. To avoid tangle on the tether, do not pack all of the tethers at once. First, enroll all the tether and make sure that there are no knots
2. Once you have unrolled the tether, take the loose end and put it into the tether bag, and pull it through the hole in the mesh pocket.
3. Pack the tether 1 m at a time into the tether bag.
4. Connect the end of the tether you pulled out through the mesh pocket in step 2 to the Blueye Surface Unit and place the Blueye Surface Unit in the mesh pocket.
5. Store the tether in the Blueye bag. The tether is manually packed in the bag after each dive. When repacking the tether, remember to pack it gradually (1 meter at a time) to avoid tangle.