Adding dive information to the video

Video overlay

If you want to permanently add dive telemetry data to your videos you can now enable video overlays. This feature requires drone software 1.7.60 and app 2.1 or newer.

The data consists of the date, time, water temperature, heading, camera tilt (only for Blueye Pro), and diving depth.

If you want to change the displayed units, make sure to set the correct units under "App settings".

If you want to toggle video overlays on and off during a dive you can do so within the camera menu after pressing the settings icon in the top right corner:

To make the video overlay feature default on or off for your future dives go to the App home screen and then press:

• "Settings" in the lower right corner
• "Drone settings"
• "Camera settings"
• Press the toggle switch marked "Video Overlay"

Logo overlay

It is possible to add logos to videos if the Blueye App is updated to v2.4.0. Logos can be added from the following locations. 

1. Setting --> App settings.   
2. Settings--> Drone settings-->Camera settings. 
3. Drone diving --> Menu --> Video --> Overlay menu

Custom logo can be selected for adding the company logo to video recordings, still pictures, and the dive report template. If you wish to not have the logo, select 'No logo' button. It is not possible to remove the logo after the file transfer. So, make sure to select the right button before recording. 

Title and subtitle overlay

It is possible to set a title and subtitle from the diving menu to the video overlay. Each title can be maximum 64 characters. 

Note: It is not possible to change the title and subtitle in the recording. But the user can edit the title during a recording. Therefore, it is important that the operator is aware that a title is being added. If the overlay is enabled and the title is set, it is displayed next to depth rating information as you can see in the picture below.